| View previous topic :: View next topic |
| Author |
Message |
nickagian
Joined: 22 Sep 2006
Posts: 2
|
 Posted: Fri Sep 22, 2006 3:12 pm Post subject: Hardware settings for programming PIC16F84A |
 |
|
Hi everybody!
Can anyone tell me what are the correct hardware settings for programming PIC16F84A?
I have tried to find them but all I found were that for PIC16F877 and they do not work properly!
Thanks in advance! |
|
| Back to top |
|
 |
Nigel Goodwin
Site Admin
Joined: 03 May 2006
Posts: 135
Location: Lower Pilsley, North Derbyshire
|
| Posted: Fri Sep 22, 2006 3:29 pm Post subject: |
|
|
| You don't select hardware settings for different PIC's, you simply select the PIC from a drop down list. The hardware settings are dependent on your programmer hardware, nothing else. |
|
| Back to top |
|
|
nickagian
Joined: 22 Sep 2006
Posts: 2
|
| Posted: Fri Sep 22, 2006 3:54 pm Post subject: |
|
|
So does that mean that I can use the default settings? I have selected the PIC16F84 from the drop down list and the default settings are:
Vdd - D2 OFF
Vpp - D3 OFF
Vpp40 - D4 OFF
Output - D0 Invert LOW
Clock - D1 Invert LOW
Input - ACK Invert LOW
Is this ok? |
|
| Back to top |
|
|
Nigel Goodwin
Site Admin
Joined: 03 May 2006
Posts: 135
Location: Lower Pilsley, North Derbyshire
|
| Posted: Fri Sep 22, 2006 9:22 pm Post subject: |
|
|
| No idea, you've never mentioned what programmer you have?, the PIC selected has no bearing on it. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
